Spray Gun G770-3.0 w/2 liter ( High Pressure )
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Model | G7701L3.0 |
| MPN | Does Not Apply |
| Brand | Unbranded/Generic |
| Spray Standard | HVLP |
A High pressure spray gun ideal for refinishing boats, cars or a wide variety of home improvement projects. This high pressure sprayer features air, fluid and fan controls to offer a wide variety of spray patterns. Features both a Stainless steel material nozzle & needle valve for years of reliable service. This low maintenance professional grade spray gun comes complete with a 3.0mm stainless nozzle, hoses, and 2-liter aluminum cup with pressure gauge. This gun is perfect for small sized to large gel coat spray up jobs. Standard 3.0mm nozzle perfect for gel coat & resin. PATTERN ADJUSTMENT: Turning Pattern Adjusting Knob to the right until tight will make spray pattern round, or turning left make spray pattern ellipse.Fluid ADJUSTMENT: Turn the Adjusting Knob clockwise will decrease the volume of fluid output and counter-clockwise will increase fluid output.AIR Volume ADJUSTMENT: Turning the Air Adjusting valve clockwise will decrease the air volume. And counter-clockwise will increase the air volume Technical Data Item No. G7701L3.0 Air Inlet 1/4" Type of Feed Suction Standard Diam of Nozzle 3.0 mm Recommended air pressure 3.0-4.0 bar (44 – 58 psi) Max. pressure of air 8.3 bar (120 psi) Fluid Capacity 1000 cc Avg. Air Consumption 4.2-7.1 CFM Pattern Width 180-280 mm Operation 1. Begin spraying. Always keep the gun at right angles to the work . 2. Keep the nozzle about 6 to 12 inches from the work surface. Grip the gun keeping perpendicular with spraying area then move it parallel for several times, Stopping gun movement in mid-stroke will cause a build up of paint and result in runs. Do not fan the gun from side to side while painting. This will cause a build-up of paint in the center of the stroke and an insufficient coating at each end. 3. Trigger the gun properly. Start the gun moving at the beginning of the stroke BEFORE SQUEEZING THE TRIGGER and release the trigger BEFORE STOPPING GUN MOVEMENT at the end of the stroke. This procedure will blend each stroke with the next without showing overlap or unevenness . 4. The amount of paint being applied can be varied by the speed of the stroke, distance from the surface and adjustment of the fluid control knob. 5. Overlap strokes just enough to obtain an even coat. NOTE: Two thin coats of paint will yield better results and have less chance of runs than one heavy layer. 6. Use a piece of cardboard as a shield to catch over spray at the edges of the work to protect other surfaces.